Page 13 - turbo

3D-Printed Prototypes

To confirm the dimensions and design of our prototype, we decided to utilize some of our rapid prototyping tools. We fired up our 3D printer and loaded the model. Check out a couple images showing the progress of the print.

3D-printing 2015 WRX parts

3D-printing 2015 WRX parts

Once the printing process was complete, we cleaned up the prototypes and installed them on our 2015 WRX to verify fitment.

It's been nearly two years since our first 2015 WRX development vehicle rolled into the shop. We've had a lot of fun with the car, and our team has developed a multitude of awesome components to aid in cooling, elevate power, and improve styling. Our product line is essentially complete, meaning we are done wrenching on our WRX. This is bitter sweet, as we will be picking up another vehicle to start the process once again. Before shipping out the WRX, we had one more project up our sleeves to extract a touch more power.

With our existing modifications, including our downpipe, intake, and cat-back exhaust system, most customers are making in the neighborhood of 290 whp and 310 wtq. Not bad for some simple bolt-on modifications and ECU tuning. We've been eyeing TGV modifications and have seen the impressive effects on Subarus from previous model years. We decided to open up the intake system on our 2015 to see if we could design a delete system that would deliver a few extra ponies.

Exciting things are happening in the induction world here at Mishimoto. We have a 2014 Subaru Forester XT in for intake R&D. This AWD turbo Subaru comes with a 2.0L power-plant, giving an output of 253 hp from factory. It shares the same FA20 heart with its 2015+ WRX counterpart, so there are some similarities between the two.

Subaru forester parts under analysis

Stock System Review

The stock Forester XT intake system is somewhat similar to the stock WRX intake system, yet featured some differences in shape and size. With both systems, the airbox is tucked away in the engine bay. To an untrained eye, it can be easy to miss upon first glance.

The airbox mounting points on the vehicle are also quite different

The EcoBoost (EB) engine series is quite impressive and packed full of amazing technology. Direct injection and efficient turbochargers have contributed significantly to improved fuel mileage without compromising engine output. Our fleet of shop vehicles currently includes two EB-powered vehicles, a Fiesta and a Mustang. Both models thoroughly impressed our team with their power, drivability, and handling. We developed a ton of new products for the 1.6L, 2.0L, and 2.3L. Now it is time to turn our attention to the V6 EB world. Our first target is a performance intercooler for the 11-14 3.5L F-150.

From our experience with other EcoBoost models, the factory intercoolers are not exactly ideal. The Mustang heat-soaks after a few pulls, and both hot hatches will quickly exceed the intercooler efficiency with a couple easy modifications. Although the factory F150 intercooler is comparably more stout than the coolers for the smaller 4-cylinder models, many have still found it to be inefficient

It has been a while since we have updated this project, but we now have something for our WRX community!

The brief data report below shows our gains with this race intake project and our baseline was a fully stock 2015 WRX with no upgrade or aftermarket tune. The numbers are quite high due to the upgrades already installed on the WRX during testing. These upgrades included our Mishimoto:

• Downpipe
• Cat-Back Exhaust
• Front-Mount Intercooler
• Custom Engine tune

WRX intake dyno testing

Interested in picking up our NB Miata oil cooler kit? Check out our discounted pre-sale linked below.

Mishimoto 1999-2005 Mazda Miata Oil Cooler Kit Pre-Sale!

Our idle warmup provided a nice baseline test to evaluate the benefit of the stock liquid-to-liquid oil cooler. From what we saw in the conditions of our first test, warmup is not greatly affected by this component. In this second portion of product testing, we will be evaluating the impact of this heat exchanger on cooling performance. More importantly, we will be evaluating the cooling benefits of our liquid-to-air cooler.

Testing Plans

Variations

• Stock liquid-to-liquid heat exchanger
• Mishimoto oil cooler setup
• Mishimoto oil cooler setup plus stock liquid-to-liquid heat exchanger

By testing the Mishimoto oil cooler both with and without the stock heat exchanger, we

We've given the 2015 WRX quite a bit of love, mostly due to the introduction of the FA20DIT within the new chassis. Our team developed a ton of awesome components: a downpipe, an intake system, a couple different intercooler options, and various other neat parts. With our WRX projects mostly wrapped up, it's time to turn our attention towards the STi. It still has an EJ engine under the hood, but it is mated to a new chassis that many are taking advantage of in various forms of competitive racing.

So far we have developed an intake and a cat-back exhaust for the STI. Our next target is a bolt-on front-mount intercooler (FMIC) kit for the 2015 STI. The EJ25 is a well-respected engine that can make great power from basic bolt-ons and tuning. In addition, the sky is the limit in terms of power output once engine internals are upgraded and a large snail is bolted up. Greater power means more heat, resulting in the need for a more efficient heat exchanger for the charge-air system. Thus,

We have some dyno data for this Focus ST Intake! Along with sharing our performance improvements, we also have video clips of the intake lid both on and off, so you can clearly hear what is going on while the engine is under wide-open throttle.

Our test vehicle is bone stock, with no aftermarket Focus ST parts, allowing us to provide a nice baseline for performance gains against the stock intake.

Results

In addition to using a fully enclosed airbox, the full 3 inch diameter piping extending all the way to the turbo ensured smooth, clean, and ample

The time has come to test our prototype design for the MK7 intake. After weeks of designing and fabrication, the prototype for this VW is now ready to hit our Dynapack dynamometer so we can collect some data.

Testing these prototype MK7 GTI parts for overall power output gains over stock is important, so that's the first thing we needed to figure out. The larger diameter piping compared to the stock system provides increased airflow that will have a direct impact on improving power output. This car did happen to come with an aftermarket stage 1 tune on it, so we tested our intake with that software upgrade.