BLOG CATEGORIES

2016+ Ford Focus RS

  1. Diff's Hot, Take it Easy - Rear Differential Cooler R&D, Part 5: A Tale of Two Track Days Part 2

    Diff's Hot, Take it Easy - Rear Differential Cooler R&D, Part 5: A Tale of Two Track Days Part 2

    At first, admittedly, it didn't look like we were flexing as hard as we could with the Focus RS. With our full PTU/RDU cooling kit installed, we extended the time on the track with all four wheels producing power by about three minutes. However, after some reassessment, Dan transplanted the PTU temperature sensor from the gear oil into the coolant stream, producing great prospects for a fully functioning AWD Ford Focus. Since it would be a while until we could take our RS to the track, we decided to reach out to a third-party tester known for thrashing their cars in the name of motorsport.

    Three's a Party

    Motorsport is all about the challenge, and pushing your vehicle of choice to the limits. In the realm of racing, there are a myriad of different genres to challenge any car, but one especially stood out for the perfect test of Ford's sophisticated AWD system"rally stages. Keen to increase the performance of their brand-new rally-prepped Focus RS, Team O'Neil

    Continue Reading »
  2. Diff's Hot, Take it Easy - Rear Differential Cooler R&D, Part 4: A Tale of Two Track Days Part 1

    Diff's Hot, Take it Easy - Rear Differential Cooler R&D, Part 4: A Tale of Two Track Days Part 1

    The term "track day" around here is always surrounded with a certain level of enthusiasm. We're all aware of the extra labor that goes into a trip to Raceway Park in Englishtown, NJ, but everyone involved is more than willing to pitch in for the chance to see our RS thrashed around the track. Think of it like one of those field trips you would take in middle school. Sure, there would be a test on everything seen that day, but that was a small price to pay for a day out of the classroom. After spending almost a week preparing it was time to take the class on their field trip.

    Hot Oil and Broken Eggs

    Our other product coordinator Steve Bryson took the journey up to the track as the perfect opportunity to snap</body> " width="600" height="400">
    Continue Reading »
  3. Mission In-Pipe-Sible - Intercooler Piping R&D, Part 3: The Hot Side

    Mission In-Pipe-Sible - Intercooler Piping R&D, Part 3: The Hot Side

    I've said it before and I'll say it again: paying attention to details is a crucial part of life. Leading professionals are gurus at doing so in their respective fields. A good chef can wade through the already heavy seasoning in something like a gumbo and tell if there is too much or too little garlic by doing a simple taste test. A good fabricator can easily tell a MIG from a TIG weld by simply watching the arc on the metal (with the proper eyewear of course). And a good tuner can tell if something as elusive as timing is off, even in the slightest, on an engine they regularly tune just by listening to it.

    If you want to be the best in your field, pay close attention to little details. It's what will set you apart from the rest of the pack. Our engineering department has honed their skills in noticing the details. In the case of our 2016 Ford Focus RS hot-side intercooler pipe, we paid close attention to airflow and noticed a problematic aspect - not with the pipe itself, but with

    Continue Reading »
  4. Diff's Hot, Take it Easy - Rear Differential Cooler R&D, Part 3: Track Prep

    Diff's Hot, Take it Easy - Rear Differential Cooler R&D, Part 3: Track Prep

    When you're hurtling towards a concrete-walled turn at over 90 MPH, you'd better know that every nut and bolt in your car is torqued to spec.


    Photo: Nick Thomas

    We've all had to prepare for something before"a date, an interview, a test. It's always a stressful experience. Now imagine you were about to go on a date with somebody you were pretty sure is trying to kill you. Or, imagine that your desk would be pushed off a 100ft cliff if you failed that test. Preparing for a track day is a lot like that.

    _MG_4004

    About a week before our Focus RS was set

    Continue Reading »
  5. What's Cooler Than Bein' Cool? Intercooler R&D, Part 3: The Big Crunch

    What's Cooler Than Bein' Cool? Intercooler R&D, Part 3: The Big Crunch

    The movement on the 2016 Ford Focus RS intercooler project may seem slow, but it couldn't be more alive. Our lead engineer for the project, at my request, has completed a plethora of testing configurations to get the most detailed amount of data possible. For the past three months, we have been rocking out on testing, testing, and more testing for the RS, the primary objectives being movement on the upcoming diff cooler and this front-mount intercooler. We know that the RS crowd loves their data, so we want to overload you with what's finally available.

    I won't sugarcoat anything here. The update is going to be very data-intensive. I don't have any entertaining anecdotes, interesting fun-facts, or puns about staying focused to fluff this piece with. Today's discussion will be about our Nitrous Blue hatchback and the focus on data.

    Continue Reading »
  6. Diff's Hot, Take it Easy - Rear Differential Cooler R&D, Part 2: The Master Plan

    Diff's Hot, Take it Easy - Rear Differential Cooler R&D, Part 2: The Master Plan

    The mood for the past few days here at the Mishimoto office has been a little giddy.  Scrawled on our calendar in one of our project manager's less than impeccable handwriting are the words "Focus RS track testing".  There's a lot of hard work being done, but underneath it all lies a childlike wonder for what's going to happen in the next week.

    Top10_06_resized

    We've spent countless hours street testing over the past several weeks, trying to learn more about the relationship between the PTU, ECU, and RDU.  We've learned a lot from this testing, but we're finding that we can't push the car hard enough on the street to match what you all are seeing at the track, without getting arrested anyway.  So, we're gearing up for another track day to push the RS and its PTU and RDU to their limits.

    Continue Reading »
  7. Tank Love - Expansion Tank R&D, Part 2: Final Reveal

    Tank Love - Expansion Tank R&D, Part 2: Final Reveal

    I told you this project was going to move fast. In the last update, we laid down our design plans for how we will give this RS coolant expansion tank some sprucing up. Not only did we make the tank more pleasing to look at, we also increased the capacity and added a neat sight tube so you can check your levels with ease. You guys have been asking for it, so let's get up close and personal.

    The stock unit pales in comparison to the size of the Mishimoto tank.
    The stock unit pales in comparison to the size of the Mishimoto tank.

    One of the first things you'll notice with this tank is the capacity increase over the stock unit. We are making this tank to fit both the Focus RS and ST, but that doesn't mean we have to stay within the size parameters

    Continue Reading »
  8. Tank Love - Coolant Expansion Tank R&D, Part 1: Design Plans

    Tank Love - Coolant Expansion Tank R&D, Part 1: Design Plans

    Anyone with a car older than 15 years or so likely has a coolant expansion tank with the structural integrity of wet toilet paper. These tanks rarely get aesthetic love in the factory vehicle design. They are usually plastic, look weird and can start cracking given enough time. After 20 years, the expansion tank in my 1995 Nissan 240SX project car will literally begin crumbling around your finger if any sort of pressure is applied. We don't want that happening to your RS/ST a decade or two from now, so we decided to design a sweet looking expansion tank that will outlast the car and be a nice addition to your engine bay.

    The stock cap is has a pressure limit of 21psi
    The stock cap on the RS has a pressure limit of 21psi

    Continue Reading »
  9. Mission In-Pipe-Sible - Intercooler Piping R&D, Part 2: The Cold Side

    Mission In-Pipe-Sible - Intercooler Piping R&D, Part 2: The Cold Side

    Our intercooler pipes are on the tail end of our journey to extract some elevated performance out of our 2016 Ford Focus RS. Along with our intercooler project making great strides in development, we have some updates to share with you regarding our intercooler piping. In usual fashion, we plan to make each pipe individually available, as well as having the option to purchase the entire kit (piping and core) as one. We aren't quite there yet, but easy does it. Let's start with the cold side intercooler piping for this RS.

    Cold side intercooler tube
    Continue Reading »
  10. What's Cooler Than Bein' Cool? Intercooler R&D, Part 2: Prototypin'

    What's Cooler Than Bein' Cool? Intercooler R&D, Part 2: Prototypin'

    Some time has passed since the last update for this 2016 Ford Focus RS intercooler project, but that doesn't mean we've forgotten about it! It's all-hands-on-deck to get this project back in the swing of R&D as we are getting close to testing and beginning a huge data push. Let's see what it looks like and quickly go through some of the design specs.

    May I present to you, our prototype intercooler for the Focus RS!
    May I present to you, our prototype intercooler for the Focus RS!

    At

    Continue Reading »
Page