Page 31 - featured

Interested in picking up our Mercedes CLA45 intake system? Check out our product page for more details.

Mishimoto Mercedes-Benz CLA45 AMG Performance Air Intake

Mishimoto CLA45 AMG intake system

It is a pretty exciting week here at Mishimoto! All our final prototype components for this awesome intake system have arrived. We have plenty of images to share, and we are excited to get our test vehicle back in the shop to confirm our final design.

Final Prototype Inlet Hose

One of the most discussed pieces included in this kit is our turbocharger inlet hose. This piece connects the turbocharger compressor

Interested in picking up this aluminum E36 expansion tank? Check out our product page linked below!

BMW E36 Aluminum Coolant Expansion Tank!

The time has come and the anticipation is over. Our final prototype unit has been constructed, and we are ready to check fitment! On to the pictures!

Final Expansion Tank Images

Mishimoto expansion tank prototype

If you follow any of the product development going on here at Mishimoto, you should have noticed our recent concentration on the Ford Mustang EcoBoost. So far we've developed, tested, and perfected a variety of awesome new components, including the list below.

• Performance Intake System
• Direct-Fit Catch Can
• Direct-Fit Oil Cooler
• Baffled Coolant Expansion Tank (still in the works)
• Downpipe (still in the works)
• Radiator (still in the works)
• Intercooler
• Intercooler Pipes
• Low Temp Thermostat (more on this soon)

The next target on our list will help your EcoBoost breathe a little easier, in the form of a larger-diameter and better-flowing cat-back exhaust. This is especially helpful for vehicles with aftermarket tuning packages. Combined with our 3" downpipe that is being developed, the exhaust system will provide the necessary flow for very high power goals, not to mention the sound you can expect with a larger

Interested in purchasing our F30 intake system? Check out our product page for more information!

Mishimoto BMW F30 Performance Intake!

Time for an update on our F30 intake project! Check out the continued progression of our development below!

Airbox Base Fabrication

We left off last time with the completion of our intake pipe fabrication that leads to the airbox. Next on the list: assembling our airbox and refining the design to the appropriate shape we wanted to achieve.

We started with the base of the box, which will be utilizing the factory air duct to acquire a cool stream of airflow.

Airbox base cardboard template

Interested in picking up this awesome aluminum expansion tank? Check out more details on our product page linked below!

Mishimoto Subaru WRX Aluminum Coolant Expansion Tank

Last year we released an aluminum expansion tank for the 2004-2014 STI and 2002-2007 WRX. We received a ton of awesome feedback from customers and enthusiasts regarding this component, as well as recommendations to produce such a tank for 2008-2014 WRX owners.

While we normally highlight our development process in multiple installments, for this Expansion Tank we wanted to give you everything in one quick shot.

Stock Expansion Tank

Although we don't see quite as many failures with the 2008-2014 expansion tank, we can assume it will incur some wear over time. This tank sits relatively close to a very hot turbocharger/exhaust and handles coolant with temperatures

Interested in picking up our Focus ST oil cooler kit? Check out our product page for more details.

Mishimoto Ford Focus ST Oil Cooler Kit

With a solid cooler mounting location in place, it was time to hit the road and collect some much needed data. In the past, we've had great results with our oil cooler kits in terms of temperature reduction, so we have no reason to believe this kit would perform any differently.

Testing Setup and Conditions

Before jumping in the car, we needed to set up our data collection equipment. We use AEM software and sensors to record temperature data for our oil cooler kits. We also use inline pressure sensors to ensure that we are retaining factory-like pressures.

Recording the stock system was easily done with our NPT sandwich plate adapter, as shown below.

Interested in picking up this awesome catch can system? Check out our product page for more details.

Mishimoto Ford Focus ST Baffled Oil Catch Can Kit

After making mockups for our initial setup and evaluating short-term testing data, our team came to a few conclusions. First, we would be incorporating our catch can into the PCV line only. Our brief accumulation test showed that we had substantial fluid accumulation with the PCV line, while the CCV can ended up dry. Second, our mounting location was really subtle and created a factory-like fitment with no visible lines. Last, the ST produces quite a lot of contaminants even in a short period of time, so a catch can is going to be a great upgrade in terms of preventive maintenance.

Bracket Fabrication

Next on our to-do list was final bracket fabrication. Something more stout and aesthetically pleasing were our targets. We would also

Interested in purchasing our new BRZ/FR-S intake system? Check out more details on our product page linked below!

Subaru BRZ / Scion FR-S Performance Air Intake

After solidifying our product design we needed to capture data to verify the design and determine if any changes were necessary. We strapped our test vehicle to the dyno and began making pulls! Check out a compilation video from the dyno testing. The audible difference in intake tone and volume is quite noticeable when comparing the stock setup with the Mishimoto prototype.

Testing Results

On to the important part, results from our tests. Intake upgrades generally

Interested in picking up our Focus ST oil cooler kit? Check out our product page for more details.

Mishimoto Ford Focus ST Oil Cooler Kit

Continuing with our progress last time, we were set on constructing a prototype bracket so that we could fully install our system and collect some on-road data.

Cooler Bracket Fabrication

When we left you our team had selected an appropriate cooler location and had started making a bracket template for the heat exchanger. Once we had a general idea of the size, bends, and hole location, we started making a bracket from plate steel.

Interested in picking up this awesome catch can system? Check out our product page for more details.

Mishimoto Ford Focus ST Baffled Oil Catch Can Kit

Ford Focus ST test vehicle

As you may be aware, our engineering team has been wrenching away on this Focus ST to develop a slew of awesome products for the community. Our oil cooler development is underway, and alongside this project we began to experiment with a direct-fit oil catch can system. Now, you may be wondering exactly how necessary such a product is.

Discussions around the community have covered the impact of oil within the intake system and its effect on valve buildup. In short, the lack