Page 10 - featured

In our last post, we took a look at the fabrication of our oil cooler bracket and the prototype heat exchanger. We've settled on the final bracket design, and now we are moving on to the heat exchanger.

Heat Exchanger Fabrication

The lead engineer on this project, Dan, plans to test several designs, including an all new heat exchanger design for this project. Exciting stuff! Before we test, we first need to fabricate our test subjects with the help of our expert welder, Mike. We will be creating a small cross-flow oil cooler, a large cross-flow oil cooler, a small dual-pass oil cooler, and a large dual-pass oil cooler.

We began with the cores of our new oil cooler designs. First up was welding the mounting points to the top edges of our cores. We have a pretty cool mounting design for our oil cooler, and we were pretty excited to see it come together.

We're on a roll with new Titan XD project development! In addition to our plans for improving the factory intake, we have decided to implement an upgrade that is simple and awesome. What we'd like to do here is develop a silicone intake hose that will replace the factory intake tube.

The factory intake tube is a well-designed piece, but it has room for improvement. For instance, we can increase the volume of air that flows through the tube, which will only benefit this 5.0L Cummins turbo diesel. The factory piece will be comparatively restrictive in size when compared with our planned design.

We have some updates for our 2015 Mustang GT intake project! Our engineering team has been diligently working on a functional prototype so we can start getting some testing results. It's full steam ahead with our plan for this intake, which includes a cool design for a fully enclosed airbox, keeping the stock tune, and of course, gaining more power! Let's briefly examine what we have so far starting with the airbox, shown below.

Prototype 2015+ Mustang Parts

In our design for the intake airbox, check out how the lid contours to the dip to the right side of the radiator; that's pretty slick! This airbox will grab air from the same location as did the stock intake airbox. Also take a look at how we designed our bracket! This was

One of the best parts about a small, dynamic company like Mishimoto is that there is never a dull moment around our R&D facility. Change happens frequently, and no two days are the same. At any given time, we've got a solid fleet of engineering vehicles at our disposal that serve as development platforms for our exciting new products, and over time, we become intimately acquainted with each vehicle's characteristics and quirks; each develops a personality and earns its own place on the Mishimoto team. This makes it tough to see them go, but it is always exciting to welcome on a new team member.

This week, it was time for our 2015 Ford Mustang EcoBoost to move on to bigger and better things. We had the car around for a decent amount of time and grew quite fond of it, but our engineers could never quite relax in its presence, particularly when they were gathered in large crowds for meetings.

However, the circle

As any traveler can tell you, it is an unparalleled experience to be an American abroad and take in so many of the mesmerizingly different facets of the world. This is to be expected, but one thing that first-time travelers often don't so readily anticipate is the way in which being abroad empowers one as a representative of his home country. (I probably should have expected this; some good friends of mine are Canadians residing stateside, and they are practically walking billboards for Tim Hortons™.) Being a walking window into American culture not only elicits patriotism, but also prompts one to join his international friends in examining the USA from the outside-in.

One pervasive international perception of the US is that of our capitalist ideals and consumerism. This is polarizing stuff, but just about everyone with whom I spoke could agree on at least on one thing: When it comes to being consumers and producers, Americans are damn good at it. We know how to make a product,

In our last post, we wrapped up the fabrication of our X- and H-pipes. Now that we have some excellent looking prototypes, it is time to put them to the test. We are not expecting much in the way of power with this modification; however we still want to give these resonator deletes the rundown for sound benefit.

Mustang GT Exhaust testing

Testing

In addition to testing for any power increase we may see with our resonator delete, we will be testing our three different X-pipe designs to determine which one we will proceed with.

Some exciting things are happening for this new Titan! In addition to the projects already planned, we want to develop a performance intake that will squeeze out a bit more power from this 5.0L V8 Cummins Turbo Diesel. We managed to get an accurate dyno reading with a few adjustments, which we know a few folks have been struggling with on this truck, but more on that later - let's dive into the stock intake!

Stock Nissan Titan air intake

Throttle body

We finally have all our prototype 2016 Honda Civic parts together for this kit. Let's briefly examine everything we have so far, starting with the airbox.

Prototype 2016 Honda Civic parts

Prototype 2016 Honda Civic parts

As we discussed in the last post, we wanted to utilize the stock air inlet as much as possible, which is why we kept an opening at the top of the airbox. The remainder of the filter enclosure is protected within the physical box, to help keep

With our first prototype intercooler and shroud assembly complete, it was time to test fit and make necessary changes or adjustments.

Prototype Cummins Intercooler Test Fit

Using the factory mounting brackets, we bolted our components into place.

Mishimoto 6.7 Cummins intercooler prototype installed

The front shroud fits nice and snug against the front bumper and grille. The core is definitely in an ideal position for optimal airflow.

Mishimoto