Page 18 - turbo

Interested in purchasing our E46 aluminum radiator? Check out our product page linked below!

We are pretty pumped about our new BMW performance parts! Our prototype radiator looks and fits great, so now let's make sure it performs as well as we intended. As we noted previously, we've made a variety of improvements over the stock core to improve heat transfer and efficiency. Let's take a look at the specs!

Core Improvements

BMW E46 radiator coolant surface area comparison

Our first comparison is coolant surface area, which is a measure of the area of the coolant tubes within the core. Greater tube area results in increased heat transfer as well

Now that we had a ton of information and data points for the stock intake system, it was time to begin creating our own design.

Piping Fabrication

We're starting our intake system at the turbocharger and working to the airbox. We intend to place our box in the same location as the stock unit so we can take advantage of the stock cold-air duct.

We switched on the band saw, fired up the welder, and started tackling the route for our prototype pipe. Our first length runs from the turbocharger around to the rear of the valve cover.

Prototype Fiesta ST parts

As many of you are aware, here at Mishimoto we have been going Fiesta crazy developing various Fiesta ST parts such as;

• Performance Aluminum Radiator
• Oil Cooler Kit
• Performance Air Intake
• Direct-Fit Baffled Oil catch can
• Downpipe and  Intercooler/Piping coming soon!

Up next is something that the team here has been very eager to start development on, the Fiesta ST Cat-Back Exhaust! We are excited to let you in on the details of the development of our first prototype. As with any exhaust project, we are shooting for improvement in flow over stock as well as a great overall tone that is drone-free. Check out the details and let us know how we did!

Stock Component

To begin, we gave the Fiesta ST's stock exhaust setup an once-over to see what we were working with. While it is not terrible, we do see some room for improvements. As you may have noticed, the stock exhaust has two mufflers. One rather

Big news for our E46 followers! Our aluminum prototype of the BMW E46 expansion tank is complete. Gone are the days of roadside tows and antifreeze puddles messing up your driveway. Enjoy the images of our awesome prototype below!

First Prototype Images

Mishimoto prototype BMW performance parts

Mishimoto prototype E46 expansion tank

We designed five different CNC-machined pieces to attach to this

Interested in purchasing our E46 aluminum radiator? Check out our product page linked below!

Mishimoto BMW E46 Non-M Performance Aluminum Radiator!

It's been a while since our last update. Don't worry, we have not abandoned our E46 aluminum radiator project. In fact, this may be the most exciting update yet. We are getting closer to bringing you guys a much-needed reliable and efficient radiator solution. Our line of BMW performance parts is growing!

Prototype Images

The wait is over! Check out a couple shots of our prototype radiator!

Mishimoto prototype E46 radiator

The search continues to find the optimal blend between a high-quality WOT (wide-open throttle) exhaust sound and a rich sound during normal driving and light-throttle driving situations. In this segment, we continue with our 2015 Mustang exhaust sound testing to see if we find our second or third prototype setup pleasing.

Dyno Testing

We set up our EB on the Dynapack for some more sound collection. We also kept an eye on power output and AFR readings to see if power changed on the factory tune, and to see if the improved flow would impact AFRs in any way. On our 2015 WRX, we saw these readings lean out a bit with the cat-back installed, so we wanted to see if this was the case with the 2.3L!

Automotive passion has evolved over the years, and is still very much alive and well. A lot of this is a result of automakers continually bringing us the best in technology, innovation, and performance. Some will complain that modern automobiles are numb, boring, and full of complicated electronics and gizmos. Whatever your take on this is, one thing is certain. People still love cars, and the impulse to modify vehicles is as strong as it has ever been.

Take the Fiesta ST for example. A compact hatchback, front-wheel drive, economical vehicle. A few bolt-on modifications can turn this into a tire-shredding, corner-carving autocross monster. It is all in how you approach new technology. You can embrace it and take advantage of what we have available in today's age, or you can curse electronic fuel injection, discredit independent rear suspension, and continue to rip around your hometown streets in your SBF-powered Cougar. Not that there is anything wrong with this. The key here is acceptance,