Page 11 - merica

Interested in picking up this awesome Mustang EcoBoost Intercooler? Check out our product page for more details!

Mishimoto Mustang EcoBoost Performance Intercooler

Prototype Modeling

Now that we had a core that was functioning to our standards, it was time to finalize our end tank design and make 3D models to reflect our plans. After some lengthy modeling work, we came up with the renders you see below!

Mishimoto prototype intercooler 3D model

Interested in purchasing our Mustang EcoBoost intake system? Check out more details on our product page linked below!

Mishimoto Ford Mustang EcoBoost Performance Air Intake

Mishimoto intake installed

After wrapping up the design of our intake for the 2015, it was time to put the car on the rollers to see if we were making any power gains. As mentioned earlier in this series, we believed that significant power gains were unlikely due to the MAP-based ECU, which is not normally affected by modified intake systems.

Dyno Testing

With that in mind, we strapped the Mustang down and made a few pulls.

Interested in picking up this awesome Mustang EcoBoost Intercooler? Check out our product page for more details!

Mishimoto Mustang EcoBoost Performance Intercooler

Will this cooler be efficient enough to properly handle the heat and pressure created by the EcoBoost? Will we see any power gains during testing? These questions will be answered in the next few minutes, perhaps even quicker if you get scroll happy and skip ahead. Don't ruin the suspense!

Stock Intercooler Testing

First, we would need to capture data from the stock intercooler. We installed bungs on both the hot- and cold-side couplers for our pressure and temperature sensors.

" width="300" height="200">

Interested in picking up this awesome Mustang EcoBoost Intercooler? Check out our product page for more details!

Mishimoto Mustang EcoBoost Performance Intercooler

An Interesting Discovery

At this point, our intercooler project took an interesting turn. We wanted to develop a cooler, including going through the process of 3D design, and working up a prototype unit. That said, we had a new idea to get some early baseline testing for core design.

After swinging by our sample room, we retrieved the cooler shown below.

Mishmoto E90 intercooler

Interested in purchasing our Mustang EcoBoost intake system? Check out more details on our product page linked below!

Mishimoto Ford Mustang EcoBoost Performance Air Intake

Last time we covered the design of our intake pipe and left you with a look at our airbox design in the form of a rendering. It's time to show you how we developed this component.

First, we started with some steel and began selecting mounting points for attaching our box. Once we found these points, we pulled out the welder and began fabricating a prototype.

Fabricating Mustang airbox

Interested in purchasing our Mustang EcoBoost intake system? Check out more details on our product page linked below!

Mishimoto Ford Mustang EcoBoost Performance Air Intake

With the stock unit out of the way we could begin developing our intake piping. We would be starting at the turbocharger and working outward to an airbox near the stock location.

Using the dimensions from the stock unit, we developed a 3D model of an inlet hose that would be constructed from a silicone material. After completing the model, we produced a unit using our 3D printer.

Printing 3D model of intake inlet tube

Because this piece is larger than the

Interested in picking up this awesome Mustang EcoBoost Intercooler? Check out our product page for more details!

Mishimoto Mustang EcoBoost Performance Intercooler

With nearly a 30-year gap between the old and new turbocharged 4-cylinder Mustang, some things are bound to change. The new Mustang features many interesting advances in technology, including direct injection, a twin-scroll turbocharger, a DOHC cylinder head with variable valve timing, and a newly designed intercooler. The 80's model featured a top-mount intercooler that was fed cool air through a functional hood scoop. This was pretty slick stuff for the days when the Walkman revolutionized how we listen to music, and "the Clapper" paved the way for a new level of laziness.

The new Mustang features a very efficient front-mounted intercooler that fits right below the radiator. A fresh stream of airflow passes through

Interested in picking up this awesome catch can kit? Check out more details on our product page linked below!

Mishimoto Ford Mustang EcoBoost Baffled Oil Catch Can

When we left you last time, we had equipped our Mustang up with our prototype dual-can setup, and we sent the vehicle out for some road use. Since we would be testing other components (intake and intercooler) at the same time, dyno pulls would also be conducted with this setup installed.

After just 300 miles of road use, this is what we found.

PCV catch can contents

Thanks for taking a look at the process for designing our innovative solution for the Mustang radiator. If you are interested in picking one up for your SN95, check with our vendors for the best available pricing.

Feel free to ask any questions you have about our improved SN95 radiator. I'd love to help out!

Thanks!