BLOG CATEGORIES

Ford Mustang GT Baffled Oil Catch Can Kit 2011-2014

  1. Stranger Danger - Baffled Oil Catch Can R&D, Part 3: Finishing Touches

    Stranger Danger - Baffled Oil Catch Can R&D, Part 3: Finishing Touches

    The prototype has been on our loaner GT for the past few months, working as it should and catching a nice amount of blow-by. The previous updates, covered how we used innovative tech to design and create the bracket, and the planned routing for the lines. Significant progress has been made since then, as the designs have taken a cleaner physical form.

    Side shot of the completed kit
    Side shot of the completed kit

    Our sample production kit arrived at our R&D headquarters and it couldn't have fit any better. Everything was spot on and the installation was easy. You can see in the above image that we've cleaned up the catch can lines with properly routed hoses. The line material is rubber based, retaining a clean, OEM look.

    To keep this

    Continue Reading »
  2. Stranger Danger - Baffled Oil Catch Can R&D, Part 2: A Canned 'Stang

    Stranger Danger - Baffled Oil Catch Can R&D, Part 2: A Canned 'Stang

    Our engineer has advanced engineering tools at his disposal. Arguably, one of the coolest in our facility's arsenal is our scanning device. This high-tech piece of equipment allows our engineer to scan anything in 3D space into a computer file. The file is then uploaded to a computer so the engineer can design whatever they want within the 3D space they scanned. The fine-tuned hands-on engineering element is still there, it's just done a lot faster and just as accurate with this machine.  We call this contraption the Faro Design ScanArm and we have a full, detailed writeup on how it works. Cool technology aside, let's get into the design of this catch can kit.

    The scan-arm at work!
    The scan-arm at work!

    Continue Reading »
  3. Stranger Danger - Baffled Oil Catch Can R&D, Part 1 - Design Plans

    Stranger Danger - Baffled Oil Catch Can R&D, Part 1 - Design Plans

    Our engineers at Mishimoto are no strangers to the dangers of oil blow by. We have well-documented evidence that this is still a common threat to most modern direct injected vehicles. For those of you that don't know, blow-by is a byproduct of compression and combustion. Blow-by is created when oil and fuel vapors push past the piston rings and into the crankcase during compression. To keep the crankcase depressurized from this oil and fuel, there needs to be some sort of venting. This is accomplished by routing this blow-by through the intake tract and right back into the cylinder to be burned during combustion.

    Even though this particular engine uses port injection, which sprays fuel directly onto the valves, the problem still lies within the venting process. By rerouting blow-by through the intake tract, there is a potential for accumulating carbon deposits on your valves in addition to a nice thin coating of oil along the inside walls of your intake (and turbo if applicable). The

    Continue Reading »