Life time warranty seal
Add your photo

Oil Cooler Lines, fits Mazda RX-8 2004–2011

Model
MMSBH-RX8-04K
€469.51 (Excl. Duties/VAT)
-
+
Add to Wish List
$Login or create an account to earn 469 pts on this product.
Key Features
Features
  • Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
  • Woven stainless steel inner jacket for increased strength and pressure tolerance
  • Nylon outer braid prevents abrasion to soft materials such as plastic or aluminium
  • Includes pre-installed pneumatically crimped 90° and straight -10AN fittings for leak-free operation
  • Nylon outer braid and anodized black hose ends provide a refined, factory-like appearance
  • Available in lengths from 92 to 182 centimeters
  • Operating temperature range from -40°C to 150°C
  • Maximum pressure rating of up to 1,000 PSI
  • Mishimoto Lifetime Warranty

Installation Difficulty: Hard

Key Features
  • Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
  • Woven stainless steel inner jacket for increased strength and pressure tolerance
  • Nylon outer braid prevents abrasion to soft materials such as plastic or aluminium
  • Includes pre-installed pneumatically crimped 90° and straight -10AN fittings for leak-free operation
  • Nylon outer braid and anodized black hose ends provide a refined, factory-like appearance
  • Available in lengths from 92 to 182 centimeters
  • Operating temperature range from -40°C to 150°C
  • Maximum pressure rating of up to 1,000 PSI
  • Mishimoto Lifetime Warranty

Product Description

The Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine's oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time.

This full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminium fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models.

These Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.
Read more

TECH SPECS

More Information
NoteThis oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.

Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ft. Do not exceed the maximum torque rating of 35 ft-lb

Purchase Includes

2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings
4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings
3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings
2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings
M18 x -10AN Fittings w/ Dowty Oil Seals
M18 x -10AN Banjo Bolts w/ Dowty Oil Seals
10AN - 10AN Male Connector
Mishimoto Lifetime Warranty

Note:

This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.

Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ft. Do not exceed the maximum torque rating of 35 ft-lb

Warranty

Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.

Frequently Asked Questions

Only registered users can ask questions. Please Sign in or create an account
CUSTOMERS ALSO PURCHASED